Carrying and storing of the polypropylene anti-corrosion tape
by：Yourijiu
2021-02-03
Believe everyone for polypropylene anti-corrosive tape should not strange, in many fields with its performance has been widely used, but in the use of time tend to have a lot of different factors affecting the use effect of product, such as during transportation and storage of the anticorrosive tape when do not pay attention to, cause the tape were damaged, and thus affecting the effects of the use of the tape, then to the use of anti-corrosion tape is better, we need to pay attention to when handling and storing what item?
< br />
1, beside the groove tube, all stow-wood support should be put on a soft material, such as carton, in order to protect the polypropylene anti-corrosion tape. < br />
2, loading and unloading: < br />
(1) should be adopted when transporting lifting wide nylon tape or special spreader, cannot use damage anticorrosive coating anticorrosion tape sling. < br />
2) it is forbidden to damage the anticorrosive coating, it is forbidden to iron chain hoist set directly on the coating commit suicide by hanging. < br />
(3) the corresponding protective measures should be taken to prevent the damage while shipping polypropylene coating anticorrosion adhesive tape. < br />
(4) it is forbidden to throw, knock against, impact, drag the harm such as anticorrosive coating operation method. < br />
(5) the method of reasonable hoisting, drop spike light. < br />
3, store: < br />
(1) if the tie up good polypropylene anti-corrosive tape buried pipeline more open trench or in a factory to have the two weeks' time. < br />
2. The weather is hot, anticorrosive tape don't exposure in the environment. < br />
3. Sun or rain on anticorrosive effect caused great impact. < br />
(4) to take on the shade, rain facilities. < br />
but when to use polypropylene anti-corrosion tape will always don't care, which can lead to problems in use to find products, to play out the corresponding use effect, so in anticorrosion tape handling and storage time pay more attention to the above points, thus can effectively reduce the use of fault, reduce the use of poor, of course, also can extend the lifespan of the tape at the same time, avoid do not pay attention to in the handling and storage, leading to penny wise and pound foolish.
< br />
1, beside the groove tube, all stow-wood support should be put on a soft material, such as carton, in order to protect the polypropylene anti-corrosion tape. < br />
2, loading and unloading: < br />
(1) should be adopted when transporting lifting wide nylon tape or special spreader, cannot use damage anticorrosive coating anticorrosion tape sling. < br />
2) it is forbidden to damage the anticorrosive coating, it is forbidden to iron chain hoist set directly on the coating commit suicide by hanging. < br />
(3) the corresponding protective measures should be taken to prevent the damage while shipping polypropylene coating anticorrosion adhesive tape. < br />
(4) it is forbidden to throw, knock against, impact, drag the harm such as anticorrosive coating operation method. < br />
(5) the method of reasonable hoisting, drop spike light. < br />
3, store: < br />
(1) if the tie up good polypropylene anti-corrosive tape buried pipeline more open trench or in a factory to have the two weeks' time. < br />
2. The weather is hot, anticorrosive tape don't exposure in the environment. < br />
3. Sun or rain on anticorrosive effect caused great impact. < br />
(4) to take on the shade, rain facilities. < br />
but when to use polypropylene anti-corrosion tape will always don't care, which can lead to problems in use to find products, to play out the corresponding use effect, so in anticorrosion tape handling and storage time pay more attention to the above points, thus can effectively reduce the use of fault, reduce the use of poor, of course, also can extend the lifespan of the tape at the same time, avoid do not pay attention to in the handling and storage, leading to penny wise and pound foolish.
< br />
Custom message
