- BOPP Tape Series
- Double-sided Tape Series
- Masking Tape & Washi Tape Series
- PVC Tape Series
- Cloth/Duct Tape Series
- Kraft paper Tape Series
- Pre-taped Masking Film
- Stretch Film
- Fiberglass Tape Series
- Special Tape
Printing tape shape design rules and principles and design direction
Printing tape is a commonly used item in our lives. Its design is not designed at will but based on actual design.
The external dimensions of the sticker will change with the change of ambient temperature, humidity and other conditions. The size of the deformation mainly depends on the material of the release paper and the base material of the film. Silicone oil paper is deformed the most by moisture, and the increase or decrease may reach as much as 0.1-0.2mm. Therefore, sufficient clearance value should be left in the design. Generally, the unidirectional gap can be 0.2-0.3mm. If PET film is used as release paper, the deformation is minimal. It is recommended to use PET release paper for precise and complex shape double-sided tape.
1. The design of printing tape should be lightweight. Many modern products will require lightweight design, because lighter items will be more convenient to use, and will not be caused by the increase in quality during transportation. There is a big increase in freight.
2. It has multiple functions. A product will be more popular only if it has complete functions, and so is the printing tape. It must not only have the function of pasting, but also the function of publicity to the enterprise.
3. To be safe, the materials used should not be harmful to the human body, and it is best to be synthetically made of green and pollution-free substances.