- BOPP Tape Series
- Double-sided Tape Series
- Masking Tape & Washi Tape Series
- PVC Tape Series
- Cloth/Duct Tape Series
- Kraft paper Tape Series
- Pre-taped Masking Film
- Stretch Film
- Fiberglass Tape Series
- Special Tape
The tape factory shares with you the reasons for the tape edge warping
When we check the tape again after using it for a period of time, we will find that some of the edges of the tape have warped? What caused the tape to warp? The tape manufacturer will find out with you.
The cause of tape warping can be analyzed from the quality, use method and storage method of the tape itself. First of all, the adhesiveness of the tape is not strong enough. This is because we did not judge the quality of the tape when we bought the tape. Some small or inferior manufacturers bought the raw materials because they wanted to buy cheap raw materials, so the tape was very sticky or not sticky . Therefore, we must master the tape purchasing skills when buying tape. Secondly, we need to understand the strength of the tape manufacturer when buying the tape. The tape manufacturer with strength is also a guarantee for the quality of the tape.
Secondly, we need to press hard when using the tape, so that the corners and corners of the explanation are combined with the paste, so as to maximize the adhesiveness of the tape.
Finally, after the tape is pasted, there should be no water or excessive humidity in the storage environment. Excessive moisture will make the adhesive of the tape non-sticky.
The above is the best way to ensure the adhesiveness of the tape, so we need to be careful when using the tape.