Use of insulating tape

The base material of the insulating tape is generally made of cotton cloth, synthetic fiber fabric and plastic film, etc. The adhesive layer is made of rubber plus tackifying resin and other compounding agents, which has good viscosity and excellent insulation performance.

In the process of using electricity, although people have noticed that the size of the cross-sectional area of u200bu200bthe power cord material has an impact on the safe use of electricity, often insufficient attention is paid to the use of insulating tape on the connector. The editor of the sealing tape manufacturer will share with you the specific method of using the insulating tape.

The laying of power lines is becoming more and more complicated, and they can be found under wooden floors, in walls, in partitions, and in wet ground or water. If the insulating tape is used improperly, electric leakage will occur, endangering personal safety.

So we must use the insulating tape correctly. The power cord connectors are divided into'+' word connection,'-' word connection, and'T' word connection. The joint should be tightly wound, smooth and free of burrs. Otherwise, before the thread is disconnected, first use wire cutters to press it lightly, then wind to the pressure port, and then swing left and right, the thread will be compliantly disconnected at the joint.

If the joint is in a dry place, first wrap 2 layers of insulating black tape, then 2 layers of plastic tape, and then use insulating self-adhesive tape to stretch about 200%, wrap 2 to 3 layers, and finally wrap 2 layers of plastic tape .