Why high temperature adhesive tape to stick type fluorine element from the film?

High temperature adhesive tape is composed of base material and glue of a kind of adhesive tape, can be used in high temperature environment, heat-resistant performance is usually between 120 to 260 degrees, especially used in the electronics industry. Wait for a problem. So why on earth would want to stick type fluorine element from the film? Introduces for you below:

type from the perspective, the paper generally tape can be used, but in view of the special weak glue, silica gel adhesive and other materials need to analyze the viscous force and material, and choose the suitable material, the application of mold membrane is produced.

from the perspective of belt, not all of the high temperature heat-resistant pressure-sensitive adhesive tapes from type membrane. Because, from type membrane mainly processing and use of consumables, the protection of film play a role. Product spotlessness, mold effect is good, it is the main function of can provide excellent mold for all kinds of silica gel with effect. And, for a variety of different organic pressure sensitive adhesive, fluorine element from type membrane can appear very light and stable mold force.

but due to the high temperature tape, according to industry and USES the difference, there are two series of silicone and rubber adhesive types. Among them, the silica gel because of will and mold processing silicon layer on the surface of the paper react, so must carry on the fluorine element type from the replacement of paper; While rubber adhesive does not need to fluorine element from type membrane, you just need to use ordinary from type paper.

< br />